pickup icon

FUSION V1

FUSWV13
Out of stock
WINGING
$2,700.00
DEFINING A NEW ERA OF FEELING AND PERFORMANCE Five years ago, we launched the FUSION project. The goal was to combine our manufacturing expertise with our knowledge of foil kite, inflatable kite, paraglider and wingsuit design. Utilising all the resources of our in-house production facility, our designers collaborated closely with...
Size :
$2,800.00

DEFINING A NEW ERA OF FEELING AND PERFORMANCE

Five years ago, we launched the FUSION project. The goal was to combine our manufacturing expertise with our knowledge of foil kite, inflatable kite, paraglider and wingsuit design.

Utilising all the resources of our in-house production facility, our designers collaborated closely with the most experienced technicians and material handlers to elevate aerodynamic performance to new heights.

 

 

Fusion has been achieved!

  • INNOVATIVE AND UNIQUE FUSION DESIGN TECHNOLOGY
  • COMBINING OZONE’S MULTIFACETED AERODYNAMIC KNOWHOW
  • EXCEEDINGLY FAST AND DYNAMIC WITH INSANE RANGE
  • DEVELOPED FOR RIPPERS LOOKING TO TAKE IT TO THE NEXT LEVEL!

The new FUSION freeride wing marks a paradigm shift in performance.Tailored to riders seeking higher speeds, dynamic jump and flight potential along with previously impossible angles up and downwind.

 

 

 

 

CUTTING EDGE PERFORMANCE:

RAM AIR TECHNOLOGY, 100% DOUBLE SURFACE, INTERNAL RIBS

Our efforts for this project centred around optimal aerofoil design, leading us to the efficient, but difficult to achieve, double surface design. We were left exploring ways to overcome both the structural challenges and the manufacturing intricacies.

Initially, the primary task of finding an immediate sense of improved performance and usability remained difficult to deliver…

We remained committed and continued our work. Through innovative construction techniques and the “ram air” principles integral to wingsuits, we’ve achieved a design that presents the wing and kite sector with a revolutionary perspective.

 

BETWEEN THE SHEETS

The Fusion wing is designed around the high-performance planform of the Flux, including the pre-loaded leading edge, which is made with stiff performance dacron and experiences drastically less deformation in strong conditions.

The 100% double surface ram air design creates an enclosed high pressure space between the entire upper and lower surfaces. The internal rib structure supports both sail layers and helps the wing smoothly deal with dynamic pressure differentials when the wing’s angle-of-attack changes.

WHAT IS THE BIG ADVANTAGE OF THE DOUBLE SURFACE DESIGN?

A dramatic reduction in drag.

When the air travels over a wing it splits at the stagnation point on the leading edge. While the air that runs along the top surface has a clean and continuous surface to follow, the airflow on the bottom of a single surface wing creates vortices behind the leading edge. This turbulent underside flow creates drag which reduces performance.

 

A HOT KNIFE THROUGH BUTTER

The Fusion’s design has unlocked enormous performance potential. Producing more lift, while reducing drag, means performance gains have moved in bigger steps and these improvements are revealed in far more areas than just locked-in, straight line speed.

By completely fairing the lower surface, designing a clean envelope structure and adding ram air intakes, the air pressure created internally helps the upper and lower surface retain positive pressure and tension over its entire area.

A well designed ram air envelope will naturally guard against luffing (the moment a canopy starts to flap) and helps support better load distribution throughout the entire sail. Utilising the dynamic pressure created by the aerofoil section, combined with ram air inflation, we have opened up a new world of untapped design potential.

Ozone’s experience developing efficient ram air structures meant that the design team had the background knowledge to push the Fusion, both in terms of performance potential and physical design.

The end result is unique; a beautifully crafted 100% double-surface wing with stunning performance, sublime design and manufacturing solutions throughout.

It feels like a hot knife through butter.

JOHNNY HEINEKEN, double kite racing world champion & Pacific Coast Wingfoil Champion 2023.

 

THE FUSION IS FAST… THE FASTER YOU GO, THE MORE POWERFUL IT GETS. IT’S LIKE ACCESSING SUPERCHARGED PERFORMANCE.

 

THE NEW REALM OF WINGFOILING:

CONTROL EVERY PART OF THE GAME

Light up every session with untold potential… This is the new realm of wingfoiling and it will keep you wanting more.

You can enjoy the Fusion on an intermediate, mid-size front foil wing, however the Fusion opens up freedom to play with smaller, faster foils and these are key to unlocking the wing’s real potential. As you tweak your foil set up to have less drag underwater, the more it will allow the Fusion’s supercharged handling and extreme airspeed capabilities to really shine.

With a greater feel for the energy at play, progressive riders will find the Fusion helps them to develop the instincts to squeeze ever increasing performance from their equipment and themselves.

 

FREQUENTLY ASKED QUESTIONS:

 

WHO IS IT FOR?

The Fusion Wing is for those who are ready to experience a new realm of winging where previously unreachable performance is now achievable. It is suitable for experienced intermediate riders and beyond who are proficient at tacking and gybing, sending and landing airs confidently and who have reached a level where they don’t regularly have major, out of control wipeouts.

The efficiency of the Fusion’s double surface wing design is notable at all times. It’s exceptionally fast, can be raced to the podium places easily and of course its speed transfers to incredible jumping height.

WHAT IS THE SINGLE MOST IMPORTANT BENEFIT?

All performance areas are improved by the fact that the ride is incredibly smooth and predictable. The double-surface absorbs gusty winds with unrecognisable ease and the wing generates so much more power with less need to sheet in hard. You can hold more wind and power than a single surface design while riding closer to the wind, which means you can go faster with incredible control.

Fusion’s speed and stability also means it’s a powerful weapon for sending it big. Due to the way the Fusion powers up, an adapted jumping and landing technique is needed to discover its true flight potential.

HOW WILL MY RIDING TECHNIQUE NEED TO CHANGE?

The Fusion handling does initially feel different, but only subtle changes to your technique are needed to get in tune and start feeling performance gains.

The simplest rule to keep in mind is: just let the wing fly!

• When pumping the wing to generate speed you don’t need to crank the rear handle excessively. Keep the pump swings short. The more you crank the rear handle, the less you’re allowing it to fly! Until you’re used to the technique, make sure you have plenty of wind for your first sessions. This will help you come up on the foil and allow you to feel the wing flying properly.

• Once you’re up and riding, focus more on the front handle which will promote greater acceleration. You will immediately notice how the Fusion likes to shoot straight upwind without the twitchiness of single surface wings. Achieving a good trim is everything for this wing; the Fusion will do the rest.

• If you’re used to riding a single surface wing, the biggest change is (as repeated in the first point): you need to become less reliant on cranking the rear handle for power. You’ll soon appreciate the Fusion’s positive, dart-like drive through tacks. Carrying more inertia due to the volume of air inside the wing makes it handle differently to a single surface wing, but once you’re dialled in, the added benefits of increased range and power are also undeniable.

When entering a tack or gybe, try to avoid doing one final big pump for some extra power, as this will kill the Fusion’s flow (which is where its power comes from). Once you’re used to the Fusion’s riding style, you will generally be riding with more speed anyway, so learn to go with the wing; let it fly and feel that flutter-free experience. Look after its trajectory and you’ll find it’s possible to make incredibly fast and fluid tacks. Carrying a higher angle into wind and with more speed means that you have less angle to complete for your tack, so for upwind gains, the Fusion is remarkable.

IS IT HEAVY?

No. In fact the Fusion 5m weighs just 100 grams more than our Flux 5m wing!

The Fusion has a unique internal structure and uses more material than our single surface wings, but all our wings are always born as light as possible. The Fusion’s leading edge and strut are built with the same stiff and lighter weight (125g) performance dacron as used on our Flux wing.

The lower surface and internal ribs are also made with a lighter weight canopy cloth for maximum aerodynamic performance and the air intakes have been developed to offer the ideal relationship between rigidity and streamlined weight. The EVA covered carbon handles are also designed to maximise control and feel while keeping weight to a minimum.

We build integrated strength into our products through high quality material placements and the careful sewing techniques developed in our in-house production facility, so have no need to add extra reinforcements or unnecessary cosmetics, which only increase weight.

DOES IT TAKE ON WATER?

The air intakes have been optimally designed to allow air in while preventing water entry. In the event that water enters the wing, there are four drainage holes located at the trailing edge; two near the strut and two at the wingtips.

We don’t recommend regularly submitting the wing to heavy, submerged wipeouts. We don’t advise it to be used as a wave wing in case a wipeout water logs it.

CAN IT BE REPAIRED?

Yes it can. Although there are two layers of canopy to deal with, the leading edge closing seam is positioned on the outside, so if you somehow manage to pierce the leading edge this can easily be accessed.

Zips next to the inflation valves on the leading edge and strut also allow for easy bladder replacement.

Repairing damaged sail cloth can be more complex than for a single surface wing as multiple seams may need to be opened if you damage more than one canopy surface. If you somehow manage to damage part of the internal rib structure it would require more intricate work by a sail repairer, but the ribs are not attached to the leading edge, so the stitching can be unpicked and replaced without needing to unpick the leading edge.


IS IT FOR ME?

If you are an experienced and solid rider who knows how to handle a wing carefully and is looking for max speed, radical riding angles, overhead drive and the sensation of riding a precision aerofoil you have to check it out!

Until you’re able to recognise how to adjust your technique to the different sensations that come from the expansive range, power and efficiency, you won’t benefit from the Fusion’s potential.

To access all the performance potential the Fusion has to offer, we recommend using higher performance foils such as the MA800 or other race foils. Simply put, the faster you go the more performance advantages come alive.

The Fusion has no windows so it takes an experienced, vigilant rider who is fully aware of their surroundings and other riders.

TRANSPORTATION ISN’T ALWAYS JUST ABOUT GETTING FROM A TO B.  AS A RIDER, HOW YOU FEEL ON THE JOURNEY IS WHAT REALLY MATTERS 

WHAT YOU FEEL:

  • The superior efficiency of the 100% double surface design along with the culmination of all features on the Fusion wing elevate every element of the riding experience
  • Engaged flying feel – this is an aerofoil like nothing you’ve laid your hands on!
  • This wing is capable of exceptional upwind and downwind trajectories. As a result it provides unmatched racing performance
  • High speed translates into remarkable elevation and airtime that has to be experienced to be believed
  • The stiff airframe combined with the pressurised, no-flutter sail gives a smooth ride that’s further accentuated by the carbon handles
  • Super smooth power management that becomes more and more potent
  • While it’s more demanding to get going, especially in light wind conditions, the benefits of efficiency vastly outweigh the negatives
  • You’ll get faster. Due to the reduced drag the wing keeps delivering more power the faster you go

WHY YOU FEEL IT:

  • High-aspect-ratio design with swept leading edge planform
  • Reduced drag due to additional entire lower surface with profile ribs sewn between both layers
  • Pre-loaded leading edge with optimised sail shaping for a tighter canopy
  • Reduced span in the larger sizes to keep wing tips from interfering with water surface
  • Ergonomically angled, rigid carbon handles with EVA grip
  • Soft bumper on front handle mount to protect your board and head
  • Knuckle-guard on leading edge with de-power handle
You have successfully subscribed!
This email has been registered