pickup icon

APEX Hydrofoil Complete Kit

HFAPV1WCMA1800
Out of stock
Hydrofoil
$2,770.00
Light Weight,Ultra Strong.  With easily accessible lift, pump and glide performance combined with precision and maneuverability the new Apex V1 MA hydrofoil range is ready to take your riding to the next level. Performance designs, light weight, ultra strong full carbon construction finished with a high quality performance surface coating....
Front Wing :
Fuselage :
Mast :
$3,350.00

Light Weight,
Ultra Strong. 

With easily accessible lift, pump and glide performance combined with precision and maneuverability the new Apex V1 MA hydrofoil range is ready to take your riding to the next level.

Performance designs, light weight, ultra strong full carbon construction finished with a high quality performance surface coating.

 

Fully Modular

The entire Apex V1 hydrofoil series is fully modular – interchange front wings, rear wings, fuselages, masts and rear wing shims to customize your setup.

New mast and fuselage sizes compliment the all-new MA range of front and rear wings.

Lift and stability Vs. Speed and Manoeuvrability

The Apex V1 MA front wings offer an incredibly wide speed range.

In general, the larger the front wing the more lift you will have and the more stable the ride will be.
A larger front wing offers increased low wind/slow foiling speed performance, however your top speed and manoeuvrability will be slightly reduced when compared to a smaller front wing.

How to chose your components :

THE COMPONENTS :

FRONT WINGS :

MA1800 (Medium Aspect):

Light Wind Performance

The MA1800 is designed as a light wind performance wing and is well suited for entry-level riders making their first runs foiling in light to moderate winds. 

Specifications:

Area: 1800cm2
Wingspan: 115cm
Aspect Ratio: 7.3 (medium)

Low Stall Speed

The medium aspect ratio, medium tapered planform and well-proportioned surface area provides ample lift and glide to get up on the foil in any breeze with a low stall speed.

Solid Control

The MA1800 has a generous top end, remaining comfortable to ride with solid control even at higher speeds. Reliable pumping performance will get you through wind lulls or from one swell to another and back again for more.

MA1500 :

An Ideal Balance

The MA1500 is suited for heavier weight intermediate to advanced riders and lighter weight entry-level riders making their first runs foiling. 

The medium aspect ratio and medium tapered planform provide an ideal balance between lift, glide and agility. 

Specifications:

Area: 1500cm2
Wingspan: 100cm
Aspect Ratio: 6.67 (medium)

Very Maneuverable

The MA1500 is very maneuverable for its size to make tight turns in the flat through to wind chops or waves.

Reliable pumping performance will get you through wind lulls or from one swell to another and back again for more.

MA1250 :

Ultimate all-round 

The MA1250 is the ultimate all-round front wing for most rider weights with an intermediate to advanced skill level.

The medium aspect ratio and medium tapered planform provide an ideal balance between lift, glide and agility.

Specifications:

Area: 1250cm2
Wingspan: 92.4cm
Aspect Ratio: 6.8(medium)

Do it All

This wing really does it all, ultra maneuverable for its size to crank tight turns in the flat through to wind chops or waves. Reliable pumping performance will get you through wind lulls or from one swell to another and back again for more.

The MA1250 is also a fun freeride kite foil for light to moderate winds. It has speed, performance, maneuverability and a massive range for intermediate to advanced riders.


MA1100 :

Speed and Agility

The MA1100 is suited for intermediate to advanced riders looking for a performance front wing for use in moderate to strong winds.

The medium aspect ratio and medium tapered planform provide an ideal balance between lift, glide and agility.

Specifications:

Area: 1100 cm2
Wingspan: 88 cm
Aspect Ratio: 7.0 (medium)

High Speed Control

The optimised profile offers accessible low-end power (lift at low speeds) combined with an incredible top end range and control at high speeds. 

Cranking Turns

This design is ultra maneuverable for cranking tight turns in the flat through to large waves.

At speed it has solid pumping performance to get you through wind lulls or from one swell to another. 

The MA1100 is also a fun freeride/freerace kite foil for moderate winds. It has speed, performance, maneuverability and a massive range for intermediate to advanced riders.

MA950 :

Perfomance Front Wing

The MA950 is suited for intermediate to advanced and lighter weight riders looking for a performance front wing for use in moderate to strong winds.

The medium aspect ratio and medium tapered planform provide an ideal balance between lift, glide and agility.

Specifications:

Area: 950 cm2
Wingspan: 81 cm
Aspect Ratio: 6.9(medium)

Accessible Low End Power

The optimised profile offers accessible low-end power (lift at low speeds) combined with an incredible top end range and control at high speeds.

Ultra maneuverable

This design is ultra maneuverable for cranking tight turns in the flat through to large waves.

At speed it has solid pumping performance to get you through wind lulls or from one swell to another. 

The MA950 is also a fun freeride/freerace kite foil for moderate to strong winds. It has speed, performance, maneuverability and a massive range for intermediate to advanced riders.


LA1200 (LOW ASPECT) :

 

Specifications :

Area: 1200cm2
Wingspan: 66cm
Aspect Ratio: 3.6 (low)

REAR WING :

MA210 (Medium Aspect):

A solid balance of stability and maneuverability

Lightweight and strong construction using a 100% carbon fiber layup.

The MA210 has been designed and tested in conjunction with the entire MA front wing range. It provides a solid balance of stability and maneuverability with all sizes of front wing. Fine-tune pitch feeling and performance using the Apex Rear Wing Shims.

Specifications:

Area: 210cm2
Wingspan: 38cm
Aspect Ratio: 6.9 (medium)

Rear Wing Shims

Rear Wing Shims are for experienced riders looking to adapt the speed, stability and maneuverability to their personal preference. These fit between the Rear Wing and Fuselage to adjust the AOA (angle of attack) of the Rear Wing. The Apex V1 complete foil kit includes -0.5deg, -1deg and -1.5deg shims.

All Apex V1 Rear Wings are factory set at the most stable configuration without a shim to provide incredible pitch and roll stability at slow to medium speeds, combined with enough front foot pressure to assist in learning maneuvers.

AOA – Angle of Attack

In general the performance effects of using negative degree shims to reduce the AOA are:

 • Increased top end speed and glide performance

• Front foot pressure decreased, back foot pressure increased

• Decreased pitch stability

The higher the degree value, the greater the effects will be. We recommend starting with the -0.5deg shim, then decreasing the AOA progressively with the -1deg and then -1.5deg to feel the effects and find your preferred setting.

Entry level to intermediate riders – if you feel too much front foot pressure, before fitting a shim to adjust the rear wing AOA, we recommend first adjusting the position of your foil on the board by moving the mast backwards. This will reduce front foot pressure without deceasing stability of the foil.


MASTS :

M45

Length: 45cm

Entry level riders and/or very shallow water depth locations.

M60

Length: 60cm

Entry level to intermediate riders and/or shallow water depth locations.

M75

Length: 75 cm

Ideal all-round length for most riders, conditions and foil sports.

M90

Length: 90 cm

Intermediate to advanced riders foiling in higher winds, carving in choppy water conditions or riding waves.

 

FUSELAGES :

F78

Specifications:

Length: 78cm

Recommendations:

The ideal length for most riders, conditions and foil sports. Ultra stable in pitch, with a refined balance of pressure between front and back foot positions.

F68

Specifications:

Length: 68cm

Recommendations:

Intermediate to advanced riders looking for ultimate manoeuvrability. The shorter length slightly decreases pitch stability.

ALL FOIL PARTS COMES WITH COVERS

MORE INFOS @ OZONEKITES.com 



Full Carbon Construction

Lightweight and Ultra Strong

All parts are constructed with an optimum combination of high-density PVC or EPS foam cores and 100% carbon laminates for an incredible strength to weight ratio. All laminations are comprised of a Quadraxial Carbon fiber matrix with high modulus epoxy resin creating superior rigidity in flex and torsion.

 

 

Performance Surface Coat

All carbon parts are finished with an ultra high quality coating used in performance marine environments such as Americas Cup racing yachts. This unique coating provides UV protection to the carbon laminate and an optimum surface finish.

Titanium Hardware

All screws and barrel nuts are CNC machined from GR5 Titanium with a Torx head fitting, guaranteeing zero corrosion and ultimate strength. Each complete Apex V1 foil is supplied with a Torx Key.

APEX Hydrofoil Complete Kit
MA1800 / M68 / M45 - $3,350.00